urmet domus 1099/209 Quick Manual page 10

EN
1 Warnings
Video recording
This device is not designed as a burglar system but mainly to transmit and record video images. URMET
S.p.A. is not in any way responsible for loss or damages of the user consequent to theft.
Before using the device, record a demo video to verify the correct functionality of this feature. URMET
S.p.A. is not in any way responsible for loss of recorded data consequent to wrong setting or usage,
device misfunctioning or failure.
This device is composed by electronic precision components. Do not hit the device while recording as
it might affect the video.
Privacy and Copyright
The IP camera is designed for surveillance systems. Video recording is subject to the laws applicable
to the Country where used. It is forbidden to record images with Copyright.
The User is responsible to check and respect all local laws and norms for video signal recording. The
manufacturer is NOT in any way liable for any usage of the product which might result not compliant
to the relevant norms.
Firmware upgrade
Refer to URMET S.p.A. Customer Service Technical Assistance periodically to check availability of
firmware upgrades.
Network configuration
Camera default setting is DHCP mode. If the network does not support dynamic addressing (DHCP),
the device will automatically switch to factory IP 192.168.1.168. Use Urmet "Easy Tool" software to
modify the IP address and other network settings to prevent any conflict with other devices on the
network.
Network connections
When connecting a PC (using Software Client or Browser), any video channel on the PC will be using
"unicast" connection (TCP, RTP, UDP).
The device can support a limited number of "unicast" connections so it is possible to show the video
on maximum 4 remote devices (of which 2 smartphones at the most) at the same time depending on
the available network band.
Reset button
Press for at least 3 seconds: the camera is completely reset and goes back to default settings.
DS1099-050A 10