Table of Contents
Advertisement
en Basic operation
Switch off the appliance after the specified cooking
6.
time.
Wait until the cooking compartment has cooled
7.
down.
8.
Empty the water tank and dry the cooking compart-
ment.
→ "After every steam operation", Page 13
Set the type of heating with steam assistance and
9.
the temperature.
Type of heat-
Top/bottom heating
ing
7 Basic operation
7.1 Switching on the appliance
Turn the function selector to any position other than
▶
the "Off" position .
a The appliance is switched on.
7.2 Switching off the appliance
Turn the function selector to the "Off" position .
▶
a The appliance is switched off.
7.3 Setting the type of heating and
temperature
Use the function selector to set the type of heating.
1.
Use the temperature selector to set the temperature
2.
or grill setting.
a The appliance starts heating after a few seconds.
8 Steam
You can switch on steam assistance with some heating
types.
WARNING ‒ Risk of scalding!
Hot steam may escape when you open the appliance
door. Whether or not you can see steam depends on
its temperature.
Do not stand too close to the appliance when open-
▶
ing the door.
Open the appliance door carefully.
▶
Keep children at a safe distance.
▶
WARNING ‒ Risk of burns!
The water tank may heat up while the appliance is in
operation.
Wait until the water tank has cooled down from the
▶
previous operation.
Remove the water tank from the tank recess.
▶
12
Temperature
240 °C
Cooking time
30 minutes
Switch off the appliance after the specified cooking
10.
time.
Wait until the cooking compartment has cooled
11.
down.
Clean the smooth surfaces with soapy water and a
12.
dish cloth.
Clean the accessories using soapy water and a dish
13.
cloth or soft brush.
When your food is ready, switch off the appliance.
3.
Tips
¡ The most suitable type of heating for your food can
be found in the description of the type of heating.
→ "Types of heating and functions", Page 8
¡ You can also set a cooking time and end time on
the appliance.
→ "Time-setting options", Page 14
Changing the type of heating
You can change the type of heating at any time.
Use the function selector to set the required type of
▶
heating.
Changing the temperature
You can change the temperature at any time.
Use the temperature selector to set the required
▶
temperature.
8.1 Steam-assisted cooking
When you cook with steam assistance, the appliance
introduces steam into the cooking compartment at vari-
ous intervals. This gives your food a crispy crust and a
shiny surface. Meat stays juicy, tender and only under-
goes a minimum reduction in volume.
Starting steam-assisted cooking
Tip: Use the programmes or the settings in the tables.
Fill the water tank.
1.
→ "Filling the water tank", Page 13
Set a suitable type of heating:
2.
– 3D hot air
– Top/bottom heating
– Hot air grilling
Set a temperature between 80 and 240 °C.
3.
Use the
button to set the steam intensity.
4.
Intensity
Setting
Low
High
a The appliance starts to heat and produce steam
after a few seconds.
Advertisement
Table of Contents
