Ubiquiti GBE-LR Quick Start Manual page 21

9. Configure each device (AP and Station) with a unique IP
address:
a. Click the
b. Review the Network settings to ensure that each device
has a unique IP address. Each can get its IP address via
DHCP, or use a static IP address.
DHCP
•
DHCP server on your network, the device will receive
its address via DHCP.
Static
•
and enter a static IP address.
c. Click Save Changes.
Repeat the instructions in the "Configuration" section on the
other GigaBeam.
UNMS Management
You can manage your device using UNMS, which lets you
configure, monitor, upgrade, and back up your devices using a
single application. Get started at www.unms.com
icon.
By default DHCP client is enabled; if there is a
Note: If DHCP client fails, the device will use the
fallback IP address: 192.168.1.20
Select this option to disable the DHCP client