Ubiquiti GBE-LR Quick Start Manual page 17

4. Enter a Username and Password, confirm the Password, and
click Save.
5. Click the
6. Configure the following settings:
a. For one device, enable Access Point mode. For the other
device (the Station), keep Access Point disabled.
b. Enter a name in the SSID field. This must be the same on
both the AP and the Station.
c. In the WPA2 Preshared Key field, enter a combination of
alphanumeric characters (0-9, A-Z, or a-z).
7. Click Save Changes.
icon.
Note: The key is an alphanumeric password
between 8 and 63 characters long.