Windster WALL MOUNT Series User Manual page 9

8 INSTALLATION
3. DUCTLESS INSTALLATION
AFTER COMPLETING Step A – G of Section 1 WALL MOUNT
a.
INSTALLATION.
b. Remove the HDK (ductless kit) and inspect for any sign of defect or
damage. (ie. dents, broken inlet)
c. Mount the air diverter at the top of the ceiling using the provided toggle
bolt anchors.
d. Make sure the duct cover vent opening aligns with the air diverter. (Fig.
2e)
e. Connect the exhaust pipe to the collar of the unit. (Fig. 2b)
f. Connect the exhaust pipe to the collar of the air diverter. (Fig. 2f)
REPEAT STEP K – M of Section 1 WALL MOUNT INSTALLATION.
g.
Installation diagram available on next page