Table of Contents
Advertisement
The lever of the push handle can be folded back to
facilitate transfers. To do so, pull up the lever and
fold it backwards.
Pull brake
1. To engage the brake, pull the brake lever backwards
with the low fingers as far as possible.
2. To disengage the brake, push the brake lever forwards
with the palm.
The lever of the push handle can be folded back to
facilitate transfers. To do so, pull up the lever and
fold it backwards.
One arm drive push brake (available as an option)
This push brake allows the user to immobilise the wheelchair
with a single arm (One brake lever; right or left hand).
3.5 Backrest
There are three types of backrest (Fixed, Folding and
Reclining) available.
1608467-E
WARNING!
Risk of injury to the assistant and damage to
the wheelchair
Tilting the chair with a heavy user can hurt the
assistant's back and damage the chair.
– Make sure to be able to safely control the
wheelchair with a heavy user before performing
a tilting maneuver.
3.5.1 Standard Backrest Cover
A standard backrest cover is available for all backrest
types. These covers are not adjustable.
WARNING!
Risk of tipping
If the standard backrest cover become slack, the
tipping point of your wheelchair is changed for
the worse.
– Slack standard backrest cover must be replaced
by a qualified technician.
3.5.2 Adjustable Backrest Cover
You can adjust the tension of the backrest cover as required.
Product Overview
15
Advertisement
Table of Contents
