Setting The Address On The Fronius Smart Meter Ts - Fronius Smart Meter TS 5kA-3 Operating Instructions Manual

Ratio of current transformers
Ratio of voltage transformers
1)
Smart Meter TS to 0.
2)
transformers = max. 1000
3)
1)
Setting the
Symbol
address on the
Fronius Smart
Meter TS
28
P1
P4
Important! Changing the transformation ratios will reset the counters in the Fronius
Transformation ratio in the current transformer x Transformation ratio of the voltage
Changeover only when using voltage transformers (direct voltage measurement VT =
Name Event
Up 1 x
Down 1 x
Enter 2 seconds
Press and hold "Enter" for 2 seconds.
1
PASS
Use "Up" or "Down" to access the P1
2
screen.
Set password "2633" with "Up" and
3
2633
"Down" and confirm each individual
value with "Enter".
PrG Note down the password.
4
IMPORTANT!
The password cannot be reset.
Use "Up" or "Down" to access the P4
1
screen.
Press and hold "Enter" for 2 seconds.
2
Set the address with "Up" and "Down"
3
and confirm each individual value with
"Enter".
Press "Up" to access screen P18 and
4
press and hold "Enter" for 2 seconds
to exit the settings.
1) 2)
(0001 - 1000 ).
1), 3) 2)
(001.0 - 1000 ).
Function
Scroll one screen forward, increase the value by
1
Scroll one screen back, decrease the value by 1
Call up settings, confirm value