River 600 Pro And River 600 Pro Extra Battery Connection - EcoFlow RIVER 600 PRO User Manual

RIVER 600 PRO and RIVER 600 PRO Extra
Battery Connection
First prepare the RIVER 600 PRO, RIVER 600 PRO Extra Battery and Expansion Power Cable, then turn off the
power of the RIVER 600 PRO and RIVER 600 PRO Extra Battery to ensure the accurate operation. If it is operated
in the power-on state, it will not be able to connect successfully.
1. Open the soft plug under the AC port of the RIVER 600 PRO to expose the Expansion Power Port, connect with
the Expansion Power Cable, and tighten the screws on both sides of the interface to prevent it from accidentally
falling off.
2. Open the RIVER 600 PRO Extra Battery dust cover, find the Expansion Power Port interface, connect the
other end of the Expansion Power Cable, and tighten the screws on both sides of the interface to prevent it from
accidentally falling off.
3. Turn on the power switch of RIVER 600 PRO, or turn on the power switch of RIVER 600 PRO Extra Battery.
The power-on icon displayed on the screen of RIVER 600 PRO indicates that the connection is successful. It is
recommended to fully recharge the battery for the first time to ensure that the capacity of the two machines is
balanced and the maximum efficiency of the RIVER 600 PRO Extra Battery can be exerted.
3
13
Power A Free Life
1
2
Expansion Power Cable
* Not included in the package, this cable only
comes with RIVER 600 PRO Extra Battery