Advertisement
N
V
3200/3300/3400 S
ET
ANTA
Feature
IP Address
DHCP
Auto-Config
Username
Password
HTTP Server
Event History
IP Routing
R
F
ESTORING
For information on restoring factory defaults, refer to the guide
Factory Default
available online at https://supportforums.adtran.com.
C
Y
ONFIGURE
The applications you will need to configure vary by product and by network. Review the list of
defaults for your unit before deciding what applications to configure. At the end of this document
is a list of configuration guides that relate to common applications that should be configured on
startup.
These guides are all available online on
g
NOTE
Important: For additional details on product features, specifications, installation, and safety, refer
to the
NetVanta 3200/3300/3400 Series Hardware Installation Guide
https://supportforums.adtran.com.
The following configuration guides provide configuration information for applications typically used within this
product. All documents are available online at https://supportforums.adtran.com.
Configuring T1 Access to a Remote Site Using PPP in AOS
Configuring Port Forwarding in AOS
Configuring Point-to-Point Protocol over Frame Relay in AOS
Configuring DHCP in AOS
Configuring VPN using Aggressive Mode in AOS
Configuring Internet Access (Many to one NAT) with the Firewall Wizard in AOS
Configuring QoS for VoIP in AOS
Configuring QoS in AOS
Configuring a VPN using Main Mode in AOS
©2018 ADTRAN, Inc.
All Rights Reserved.
D
ACTORY
EFAULTS
A
OUR
PPLICATION
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY
HANDLING PRECAUTIONS REQUIRED
D
ERIES
EFAULTS
Default Value
10.10.10.1
Client Enabled
Zero Touch Provisioning Enabled
admin
password
Enabled
On
Enabled
Restoring an AOS Device to
ADTRAN's Support Community
From within the U.S.
From outside the U.S. +1 256.963.8716
PRICING AND AVAILABILITY 1.800.827.0807
.
available online at
ADTRAN CUSTOMER CARE:
1.888.423.8726
Advertisement
