Menu Overview - KERN ADB-A Operating Instructions Manual

11.2 Menu overview

Menu item
Adjustment mode
Reference quantity
Automatic
zero point correction
Baud rate
Data output
Sound by pressing
the button
Automatic internal
adjustment interval
(only ADJ models)
Filter
* = factory setting
ADB_ADJ-BA-e-2032
Settings Description
C1 - 0 Automatic internal adjustment (ADJ models)
External adjustment
(ADB models: always use this setting)
C1 – 1
Note: At the models with internal adjustment
weight the adjustment with external weight is not
recommended..
C1 - 2 Manual internal adjustment (ADJ models)
C2 – 0* 10
C2 - 1 20
C2 - 2 50
C2 - 3 100
C2 - 4 1000
C3 - 0 No Zerot Tracking
C3 – 1* 1D Zero-point Tracking
C3 - 2 2D Zero-point Tracking
C3 - 3 3D Zero-point Tracking
C3 - 4 4D Zero-point Tracking
C3 - 5 5D Zero-point Tracking
C3 - 6 Not documented
C4 - 0 1200
C4 - 1* 2400
C4 - 2 4800
C4 - 3 9600
C5 - 0 Automatic output of stable weighing values
C5 - 1 Via remote control command W (w)
C5 - 2 Continuous data output
Output for stable and instable weighing values
C5 – 3*
after pressing PRINT key
C6 – 0 switched on
C6 - 1* switched off
C7 - 0* 2 hours
C7 - 1 3 hours
C7 - 2 4 hours
C7 - 3 6 hours
C7 - 4 8 hours
C8 - 0* Low interference degree
C8 - 1 Medium interference degree
C8 - 2 High interference degree
C8 - 3 Not documented
25