Next steps
1. Replace the
battery
cable.
2. Replace the
base cover
3. Replace the
SD memory card
4. Follow the procedure in
Removing the M.2 2230 Solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Disconnect the
battery
Steps
1. Remove the single (M2x3) screw that secures the thermal plate to the palmrest and keyboard assembly [1].
2. Turn the thermal plate over [2].
3. Slide and remove the thermal plate from the solid-state drive slot [3].
after working inside your computer
before working inside your computer
cable
Retirar e instalar componentes
51