Next steps
1. Replace the
battery
cable.
2. Replace the
base cover
3. Replace the
SD memory card
4. Follow the procedure in
Removing the M.2 Solid-state drive bracket
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Disconnect the
battery
Steps
1. Remove the single (M2x3) screw that secures the solid-state drive bracket to the palmrest and keyboard assembly [1].
2. Remove the solid-state drive bracket from the palmrest and keyboard assembly [2].
after working inside your computer
before working inside your computer
cable
Retirar e instalar componentes
49