Standard Filter Cleaning / Installation Instructions - Friedrich Kuhl SM18M30 User Manual

Standard Filter Cleaning / Installation Instructions

STEP 1. Swing the door open and remove the fi lter by grasping the
fi lter grip and pushing the fi lter holder upward and outward.
Figure 2
Figure 3
920-198-00
STEP 2.
NOTE: Make sure the front frame with the mesh fi lter is facing you.
Figure 4
FRR071
STEP 3.
Figure 5
FILTER
GRIP
HANDLE
FRR052
STEP 4.
NOTE: The fi lter handle slides into the frame in only one direction. If
STEP 5.
Slide the fi lter grip out from the fi lter as shown in Figure 4.
Swing the front frame open. Clean the front frame by washing
the dirt from the fi lter. Use a mild soap solution if necessary.
Allow fi lter to dry.
A
FRONT
FRAME WITH
STANDARD
MESH FILTER
Install the fi lter grip back into the fi lter by sliding it into the fi lter.
the tab in the frame stops the handle from sliding in, slide the
handle from the other direction. Do not force the handle into
the frame.
Install the fi lter back into the unit. Follow the Instructions on
the inside of the front door.
FILTER
FILTER
GRIP
FRR047
TOP TAB
FRR048
7