Friedrich QuietMaster SM18L30A Quick Reference Manual

Quick Reference Guide

For models with electronic controls only.

Room Air Conditioner

1
TO START UNIT
Touch the Power button. The unit will automatically be in regular COOLING mode with the
temperature set at 75 ° F (24 ° C) and the fan speed at F1 (SLEEP).
NOTE: Should the Check Filter light fl ash when you fi rst turn the unit on, touch the Check Filter
button to turn off the fl ashing light.
2

TO ADJUST TEMPERATURE

COOLER – Touch and hold until the display shows the desired room temperature.
WARMER – Touch and hold until the display shows the desired room temperature.
FAHRENHEIT / CELSIUS – Touch ºF / ºC to show the temperature in Celsius, touch again to
show Fahrenheit.
3
TO ADJUST THE FAN SPEED
Touch 1-4 Speed until the display shows the desired fan speed. F1 is the lowest setting
(SLEEP SETTING), F2 is LOW, F3 is MEDIUM, F4 is HIGH. Touch Smart Fan (light on) and
the fan speed will adjust automatically to maintain the desired comfort level.
Touch 1-4 Speed for manual control of fan speeds.
4
TO SET THE CLOCK TIME
Touch Set Hour and hold until the hour closest to the actual time appears in the display. Make
sure you set A.M. and P.M. properly.
Minutes will NOT show on the display.
5 TO SET THE TIMER
STOP TIME – Touch A/C Stop and hold until the hour you want the unit to shut off appears in
the display.
START TIME – Touch A/C Start and hold until the hour you want the unit to come on appears
in the display.
Touch Timer On/Off (light on) to activate the timer function. Touch Timer On/Off (light off) to
cancel the timer function. Once the on and off times have been selected, they will remain in
memory. However, if the power is interrupted, set the clock time again.
PM
1
Power
Cool
Mode
2
Temp
1-4
3
Speed
Fan
A/C
Stop
5
Timer
920-199-01 (7-06)
4
Set Check
Hour Filter
Press to reset
Money Fan
Saver
Only
®
O O
F / C
Smart
Fan
A/C
Timer
Start On/ Off