Mitsubishi Electric LOSSNAY LGH-F300RX5-E Handbook page 32

1 Function selection mode
The following functions can be changed with PZ-60DR-E function selection mode. Please change the set-
tings as needed.
Intermediate
Major items
items ( Names )
Change English display
Language
German display
Spanish display
Russian display
Italian display
Chinese display
French display
Japanese dis-
play
Function limit Button operation
restricted mode
( Operation lock )
24 hour ventila-
tion setting
( The LGH-
F1200 type
cannot be set )
Mode Clock use set-
selection ting
Timer function
setting
Contact number
setting
( Display contact
information when
there is a fault )
Display Filter mainte-
change nance sign set-
ting
Lossnay core
maintenance
sign setting
*1: To execute the operation lock, the execution operation ( of holding down the "Filter" button and the "ON/OFF"
button simultaneously for 2 seconds ) is required at the normal screen.
To cancel, the same operation is also required.
Dot matrix Selection
display display
oFF
no1
no2
oFF
on
oFF
on
on
oFF
on
oFF
─ 32 ─
Function
Dot matrix display characters
( Factory setting )
Dot matrix display characters
Dot matrix display characters
Dot matrix display characters
Dot matrix display characters
Dot matrix display characters
Dot matrix display characters
Dot matrix display characters
Without operation lock ( Factory setting )
Lock with the exception of the "ON/OFF" but-
ton
All button lock
Stops operation by pressing the "ON/OFF"
button during operation ( Factory setting )
Extra Low fan speed operation by pressing
the "ON/OFF" button during operation
To stop, press the "ON/OFF" button twice
within 3 seconds, or hold down the "ON/OFF"
button for 5 seconds.
Clock function is not used
Uses the clock function ( Factory setting )
Uses the weekly timer ( Factory setting )
This cannot be selected unless the clock
function is used
Uses the simple timer
Clock ( time, day of the week ) is not displayed
Timer is not used
Contact information is not displayed when
there is a fault ( Factory setting )
The telephone number that has been set is
displayed at the time of fault
With "FILTER CLEANING" maintenance sign
display
Without "FILTER CLEANING" maintenance
sign display ( Factory setting )
With "CORE CLEANING" maintenance sign
display
Without "CORE CLEANING" maintenance
sign display ( Factory setting )
Notes
English
German
Spanish
Russian
Italian
Chinese
French
Japanese
*1
*2
*3
*4
*5