Fundamentals Of Operation - Mitsubishi Electric LOSSNAY LGH-F300RX5-E Handbook

6. Fundamentals of operation

Description of the circuit operation
( 1 ) System Configuration
Lossnay operates through the following system.
System
Classification Details
Basic 1 Lossnay
System unit
1 Remote
controller
Two 1 Lossnay
remote unit
control- 2 Remote
lers sys- controllers
tem
Multiple Multiple
units Lossnay
system units
Systems Level sig-
inter- nal output
locked device
( other
with
external manu-
devices facturer's
( air PAC, etc. )
condi- or pulse
tioning signal out-
units )
put device
( building
control
system,
etc. )
Mr. Slim
( A-control
or
K-control
remote
control-
ler )
System Diagram
Lossnay
Remote
Transmission cable
M-NET
controller
between the remote
controller and Lossnay
R
Remote controller : PZ-60DR-E or PZ-41SLB-E
Transmission cable terminal
blocks between Lossnay unit
M-NET : M-NET transmission cable
terminal block
R : Remote controller
( PZ-60DR-E or PZ-41SLB-E )
Lossnay
Remote
M-NET
controller
R
Lossnay Lossnay
Remote Remote
M-NET M-NET
controller controller
R
Remote controller (PZ-60DR-E or PZ-41SLB-E)
External device
(Other manufacturer's
PAC, etc.)
Level (pulse) signal
Output device
Remote controller (PZ-60DR-E or PZ-41SLB-E)
(Operation without a remote controller is also
possible.)
Mr. Slim
indoor unit
Mr. Slim
Lossnay
interlocked
signal
A,K
A-control or
K-control remote
controller
• One remote controller oper-
ates one Lossnay unit.
• Two remote controllers oper-
ate one Lossnay unit. ( Last
touch priority operation )
* PZ-60DR-E and PZ-41SLB-E
R
cannot be used together.
• A maximum of 15 Lossnay
Lossnay
units can be operated by
Remote
a single remote controller.
M-NET
controller
( Group operation )
• All units will operate in the
same mode.
• Lossnay is started/stopped
by a signal ( *1 ) from an
Lossnay
external device.
M-NET Remote
controller
• Having a remote control per-
mits last touch priority opera-
tion with the external device
and the remote controller.
• A maximum of 15 Lossnay
R
units can be operated.
*1: An uncharged a-contact,
• Lossnay can be started/
Lossnay stopped by an A-control
remote controller or a
M-NET Remote
controller
K-control remote controller.
• Lossnay High or Low fan
Mr. Slim-Lossnay
connection cable speed can be selected from the
(Included parts with
A-control remote controller.
Lossnay)
• Lossnay stand-alone opera-
tion is permitted from the
A-control remote controller.
* Neither PZ-60DR-E nor
PZ-41SLB-E can be used.
─ 14 ─
Features
12 V DC or 24 V DC level
signal, or an uncharged
a-contact, 12 V DC or 24 V
DC pulse signal.
Prepared
Parts
Lossnay
remote
controller
( PZ-60DR-E or
PZ-41SLB-E )
Lossnay
remote
controller
( PZ-60DR-E or
PZ-41SLB-E )
Lossnay
remote
controller
( PZ-60DR-E or
PZ-41SLB-E )