Rear Panel Connections & Controls - Emotiva Airmotiv RS13 User Manual

Rear Panel Connections & Controls
All audio inputs and AC power connections for the Airmotiv Reference Subwoofers are located
on the rear panel. The RS13 and RS11 have identical controls, audio inputs, and AC power
connections. (Airmotiv RS13 Reference Subwoofer shown.)
1. Service Port
The service port is used by the factory to configure the DSP firmware in the Reference Subwoofer.
2. Line Level Inputs
Use the Left and Right Line Level Inputs to connect the Reference Subwoofer to a line level audio
source that has stereo subwoofer outputs. Use just the Left (L) Line Level Input if your source has a
single unbalanced subwoofer output or LFE output.
3. Balanced Line Level Input
Use the Balanced Line Level Input to connect the Reference Subwoofer to a source with a
balanced line level output.
AIRMOTIV R
efeRence
SERVICE LINE INPUTS
L R
LFE
1 2
POWER
5
7
6
FUSE
S
ubwOOfeRS
BAL IN LOOP OUT
MONO
3 4
®
Page 12