Airmotiv Subwoofer Controls - Emotiva Airmotiv Series User Manual

Airmotiv Subwoofer Controls

All of the controls and input connections on the Airmtoiv S10, S12, and S15 are on the rear panel.
All three models offer the same input and control options (the Airmotiv S12 is shown).
1. RCA Inputs (unbalanced)
The Airmotiv subwoofer has two unbalanced line level audio inputs, which are summed together
internally. If your source component provides separate left and right subwoofer or full range
outputs, they should be connected to the Left and Right RCA inputs. If your source provides a
single unbalanced subwoofer output, it may be connected to either RCA input.
2. Balanced Input
If your source component has a single balanced subwoofer or LFE output, then it should be
connected to this input. (If your source component offers both balanced and unbalanced
outputs, the balanced connection is preferred because it offers better resistance to line noise,
especially if you are using a long interconnect cable, or if your interconnect runs through the wall
or near a power cable.)
AIRMOTIV SUBWOOFERS
Page 8
1
2
3
4
5
6
7
8
9
10
11
12