Airmotiv S8 Flex Subwoofer Controls
All of the controls and input connections on the Airmtiv S8 Flex Subwoofer are on the rear panel.
1. High-Pass Crossover Frequency
This switch selects the crossover frequency for the high-pass filter portion of the internal bass
management on the Flex Sub. This switch controls ONLY the crossover frequency for the high-pass
filter that is applied to the Line Level Outputs on the Flex Sub.
2. Line Level Outputs
Connect the Line Level Outputs to the input on your power amp if the Flex Sub is providing bass
management for your system. These outputs provide an audio signal that has been processed by
the user configurable high-pass filter portion of the internal bass management on the Flex Sub.
3. Stereo Line Level Inputs
Use the Stereo Line Level Inputs to connect the Flex Sub to a line level source that has stereo full
range outputs.
AIRMOTIV S8 F
1
2
L
60 HZ
80 HZ
100 HZ
R
6
VOLUME
8
0
PHASE
110
10
S
lex
ubwOOFeR
3
4
5
HIGH LEVEL IN
OUT
IN
L
-
+
LFE
R
STATUS
X-OVER
180
AUTO
ON
POWER
11
12
13
Page 9
7
9