Emotiva Airmotiv RS13 User Manual page 19

AIRMOTIV R S
efeRence ubwOOfeRS
Note: The Airmotiv Reference Subwoofers have a sophisticated built-in DSP-based crossover
system, which offers flexible configuration options for connecting to a source that provides
a stereo or monaural full range output, or can be bypassed for use with sources that have
internal bass management and offer a subwoofer or LFE output.
Note: In order to minimize input noise, the Reference Subwoofers detect whether you are
using the balanced or unbalanced inputs when you power them on, and disable the input not
currently in use. If you wish to change active input you must power cycle the
Reference Subwoofer so that it recognizes the change.
4. Loop Output
The input signal received by the Reference Subwoofer is passed directly to the balanced Loop
Output for connection to additional subwoofers.
5. IEC Power Receptacle
The IEC Power Receptacle accepts any standard IEC power cable. A high quality commercial power
cable is provided with your Reference Subwoofer.
6. Fuse Holder
The AC line fuse for the Airmotiv Reference Subwoofer is located directly beneath the IEC Power
Receptable on the rear panel. (See Page 17 for details about how to change the AC line fuse.)
7. AC Power Switch
Use this switch to turn the main AC Power to your Airmotiv Reference Subwoofer Reference
Subwoofer On and Off.
Note: The Airmotiv Reference Subwoofer will only operate if the AC POWER Switch is turned
ON. If the AC POWER Switch is OFF, your Reference Subwoofer will NOT operate, and the Power
Auto / On Switch will have no effect.
Page 13