Emotiva Airmotiv RS13 User Manual page 17

Inputs and Outputs:
To reduce unwanted noise, when the RS11 is powered on, it will detect which audio input is being
used, and temporarily disable the other input.
The Airmotiv RS11 Reference Subwoofer has:
• Stereo Left and Right unbalanced RCA inputs.
(The Left Unbalanced input is also the Unbalanced LFE input.)
• Balanced Mono LFE input.
• Balanced Loop Output (pass through).
Electronics
All of the operating controls and status indicators on the Airmotiv RS11 are located on the top
panel under a removable, magnetically attached, smoked plastic cover.
• Powerful dual-core 48 bit DSP audio processor for optimum precision and flexibility.
• Variable Phase control: 0 to -180 degrees.
• Variable Level control: -20 dB to +15 dB.
• Variable Crossover Frequency control: 40 Hz to 160 Hz.
• An extremely effective, totally transparent limiter which makes it virtually impossible to
overload the RS11 or make it sound bad.
• User selectable Bass profiles:
Deep profile allows for response flat from 20 Hz to 240 Hz +/- 3 dB.
Flat profile introduces a gradual rolloff below 30 Hz (-3 dB at 23 Hz).
• User selectable Crossover Bypass.
• User selectable power mode:
Always On
Auto-On
Cabinet
• Heavy-duty furniture grade acoustically inert HDF cabinet.
• Full 50mm thick front baffle, 25mm side walls, and extensive internal bracing.
• Front firing low noise countoured slot loaded port.
• Finshed on all sides in furniture grade flat black lacquer or a high gloss piano black finish.
• Attractive countoured fabric grill, firmly attached by powerful magnets for easy removal.
Environmental and Mechanical
• AC Power: 120/230 VAC at 50/60 Hz (automatically detected).
• DImensions: 15 inches wide x 17-1/4 inches deep x 15-1/2 inches high.
(add one inch to height for feet; add one inch to depth for grill and one inch for connectors)
• Weight: 62 Pounds.
• Permanently attached non-slip rubber feet.
AIRMOTIV R
efeRence
S
ubwOOfeRS
Page 11