Huawei FusionServer Pro CH225 V5 Technical White Paper page 30

Huawei FusionServer Pro CH225 V5 Compute Node
Technical White Paper
Table 5-6 M.2 FRU indicator description
Indicator
M.2 FRU fault
indicator
M.2 FRU activity
indicator
NVMe Drive Indicators
Figure 5-14 NVMe drive indicators
Table 5-7 Description of NVMe drive indicators (only orderly hot swap supported)
Activity Indicator
(Green)
Off
Steady on
Blinking at 2 Hz
Off
Off
Steady on/Off
Issue 06 (2020-07-31)
Description
● Off: The M.2 FRU is running properly.
● Blinking yellow: The M.2 FRU is being located, or
RAID is being rebuilt.
● Steady yellow: The M.2 FRU is faulty or not
detected.
● Off: The M.2 FRU is not in position or is faulty.
● Blinking green: Data is being read, written, or
synchronized.
● Steady green: The M.2 FRU is inactive.
Fault Indicator
(Yellow)
Off
Off
Off
Blinking at 2 Hz
Blinking at 0.5 Hz
Steady on
Copyright © Huawei Technologies Co., Ltd.
5 Hardware Description
Description
The NVMe drive cannot be detected.
The NVMe drive is working properly.
Data is being read from or written to
the NVMe drive.
The NVMe drive is being located or
hot-swapped.
The hot removal process is complete,
and the NVMe drive is removable.
The NVMe drive is faulty.
24