Remote Microphone - RCS AUDIO-SYSTEMS VARES 3000 Operating Instructions Manual

Audio- & alarmmanagement
Table of Contents

Advertisement

SOFTWARE
First select in the window „equipment" PSS-224A/B. After-
wards one receives the data through presses the buttons
„receiving ". Here the current attitudes appear, the firmware
version and the arisen errors.
In the field „bus monitoring "can be deactivated and acti-
vated the monitoring for each substation individually (ac-
cordingly the monitoring must be stopped in the respective
remote microphone!).
In the field „error statistics" the arisen errors are indicated
and can be put back.
The "monitoring" field serves the purpose of continuous on-
and off switching of the monitoring function or rather you
can set the intervals between 100 sec. and 24 hours. The
error-beeper can be deactivated as well. (such as during in-
stallation)
These settings are only activated after sending!
The "global" and "single components" fields represent che-
cking or error search.
In case you select remote microphone 1-24 under "device",
all of the above mentioned functions are available for the re-
mote microphone components.
CONFIGV3000 (V2)
Zuerst wählt man im Feld „Gerät" PSS-224A/B aus. Danach
empfängt man die Daten durch drücken des Buttons „Emp-
fangen". Hier erscheinen nun die aktuellen Einstellungen, die
Firmware Version und die aufgetretenen Fehler.
Im Feld „Bus Überwachung" kann die Überwachung für jede
Sprechstelle einzeln de– und aktiviert werden (dementspre-
chend muß die Überwachung in der jeweiligen Sprechstelle
eingestellt werden!).
Im „Fehlerstatistik" Feld werden die aufgetretenen Fehler an-
gezeigt und können zurückgesetzt werden.
Das Feld „Überwachung" dient zum dauerhaften Ein –und
Ausschalten der Überwachung, bzw. lassen sich die Inter-
valle zwischen 100sek. und 24Std. einstellen. Auch kann der
„Fehler –Beeper" deaktiviert werden (z.B. während der In-
stallation).
Diese Einstellungen werden erst nach dem Senden aktiv!
Die Felder „Global" und „Einzelkomponenten" dienen zum
Überprüfen bzw. zur Fehlersuche.
Wählt man bei „Gerät" eine Sprechstelle 1 – 24 aus, stehen
die oben genanten Funktionen für die Sprechstellen Kompo-
nenten zur Verfügung.
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pss-224c

Table of Contents