Table of Contents
Advertisement
Sequence of operations 9. If the codes typed in for the first and second time are
Returning into the menu
item Changing the
supervisor code
Exit from the menu
38
identical with each other, the instrument exits from the
menu item. You will see this
Do not forget the supervisor code you have specified. If you
forget it, defining another one is possible only in the
service.
1. As you have already left the menu item Changing the
supervisor code, you will see this:
(2. If you want to change the setting you have just
performed, or if you just want to check what you wrote in,
continue the operation from Point 3 of the Sequence of
operations.)
(3. If you do not want to exit the menu, as you want to
perform further settings, you may press the ▲ button to
select the desired menu items.)
1. Press the MENU button. First the mnemonic
(Save), then the mnemonic
the display. With that, the storing of the settings is
completed. The instrument has exited the menu and goes
on with the measurement.
on the display.
.
(Exit) will be shown on
DT9102 B
20180905-V120180905
Advertisement
Table of Contents
