Software Novalct; Function Overview; Figure 93: Start Screen Software Novalct; Table 14: Main Menus And Functions - NEC FE Series User Manual

8

SOFTWARE NOVALCT

Control, configuration and calibration of the LED Wall is managed by
NovaLCT Software.
For detailed information, see the respective manual for NovaLCT
Software. Download the current version at:
https://www.novastar.tech/download/download-software/

Figure 93: Start Screen Software NovaLCT

8.1 Function Overview

Table 14: Main Menus and Functions

Menu Description
System Reconnect
Settings Screen
Configuration
(Advanced User)
Brightness
Multi-function
Card
Multiple-screen
Management
Hardware
Information
Restore Screen
Reconnect the NovaLCT to the synchronous
system.
Configure the LED screens.
Adjust the brightness of the LED display.
There are two ways for brightness adjustment,
automatic brightness and manual brightness.
Open the page for Multi-function card
configuration.
Open the page for combined display
configuration. The management of brightness
control and monitoring of multiple LED
displays is easier when these LED displays are
combined together.
Check the information on the current control
system for the LED display.
Configure the settings for the restore screen,
booting screen and no signal screen (including
a disconnected network cable and no DVI
signal).
© NEC Corporation 2019 63