Corner Alignment Pins; Screw Connection For Cabinets; Figure 11: Corner Alignment Pins; Figure 12: Screw Connections For Cabinets: Screws And Counter Plates - NEC FE Series User Manual

3.5.2.1 Corner Alignment Pins

At the top of each FE Series cabinet are two special corner locating pins (Figure 11, A) – with a
diagonal inside the corner pin. This design allows the cabinets to be securely stacked upon
each other for up to 15 layers – reaching at total height of 5 meters.

Figure 11: Corner Alignment Pins

3.5.2.2 Screw Connection for Cabinets

The Screw connections between the cabinets guarantee quick installation and easy
maintenance.
Each cabinet has two sets of Screw connections:

two sets of Allen screw anchors – left and top (Error! Reference source not found., B)

two sets of Counter plates – right and bottom (C)
This design allows modules to interconnect tightly in order to create a seamless LED Wall
display.
C

Figure 12: Screw Connections for Cabinets: Screws and Counter plates

Section 6.3.2 explains how to interlock two cabinets.
A
B
© NEC Corporation 2019 22