HP EliteBook x360 1040 G7 Maintenance And Service Manual page 63

Table 5-7 Speaker description and part number
Description
Speakers (includes left and right speakers, cables, and rubber isolators)
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
Remove the speakers:
1. Detach the keyboard cable from the right speaker. (The keyboard cable is attached to the right speaker
with double-side adhesive.)
2. Disconnect the right speaker cable (1) from the system board.
3. Release the WWAN antenna cable from the retention channel (2) built into the right speaker.
4. Remove the three Phillips M2.0 × 3.5 screws (3) that secure the right speaker to the computer.
5. Remove the right speaker (4) .
NOTE:
absence of or damage to this isolator can result in degraded right speaker performance.
6. Disconnect the left speaker cable (1) from the system board.
7. Release the WWAN antenna cable from the retention channel (2) built into the left speaker.
8. Remove the three Phillips M2.0 × 3.5 screws (3) that secure the left speaker to the computer.
ENWW
(Bottom cover on page
Battery on page
When removing the right speaker, make note of the location of the rubber isolator (5). The
(Preparation for disassembly on page
44).
45).
Spare part number
M16007-001
44).
Component replacement procedures 55