Vehicle Specifications - Hayter MT313 Operator's Manual

1.21

VEHICLE SPECIFICATIONS

Travel Speed:
Tyres Tyre Type
Front axle 20 x 10 - 10
Titan turf pattern.
Rear 20 x 10 - 10
Titan turf pattern
Wheel Nut Torque Setting: Front axle
Service Brakes: Closed loop hydrostatic service braking operating on all three wheels.
Parking/Emergency Brake: Lever operated oil immersed disc brakes on front wheels only. Pressurised
hydraulic oil release with optional hydraulic override for emergency towing purposes.
Ground Clearance: 150mm at 13mm cut height and with cutterheads raised.
Steering: Hydrostatic rear wheel steering, emergency manual steering.
Features: Swing-out centre cutterhead.
Tilting operator platform.
Lockable engine cover.
Adjustable seat.
Adjustable steering column.
Cutterhead parking latches with safety locks.
Backlapping facility.
Limited lift cutterhead latches
Engine coolant and hydraulic oil overheat audible warning (horn).
Variable cutterhead weight Transfer/traction assistance.
Safety Features: Neutral start interlock on transmission pump, parking / emergency brake,
cutterhead drive switch and swing-out centre cutterhead.
Operator presence control (seat switch).
SPECIFICATIONS
0-15 km/hr (0-9.3 mph) forward.
0-8 km/hr (0-5 mph) reverse.
Recommended Tyre Pressures
Turf Conditions
4 ply
0.7 bar min
(10 psi )
4 ply
0.7 bar min
(10 psi).
54 Nm
Rear axle 54 Nm
Road Conditions
Max Pressure
1.5 bar
1.4 bar
(20 psi) (22 psi)
1.4 bar 1.5 bar
(22 psi)
(20 psi)
111-0467CR201205
1.21