Toro Groundsmaster 4500-D Operator's Manual page 30

Figure 24
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 24B and
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 24D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O position locks the protected menu.
N
You can view and change the settings in the Protected
Menu. Once you access the Protected Menu, scroll
down to Protect Settings option. Use the right button
to change the setting. Setting the Protect Settings to
O allows you to view and change the settings in
FF
the Protected Menu without entering the PIN code.
Setting the Protect Settings to O
options and requires you to enter the PIN code to
change the setting in the Protected Menu. After you
set the PIN code, rotate the key switch O
to the O position to enable and save this feature.
N
Figure 24C). Repeat this step
position and
FF
hides the protected
N
and back
FF
Viewing and Changing the
Protected Menu Settings
1. In the Protected Menu, scroll down to Protect
Settings.
2. To view and change the settings without entering
a PIN code, use the right button to change the
Protect Settings to O
3. To view and change the settings with a PIN
code, use the left button to select O
PIN code, and turn the key to the O
and then to the O
Setting the Maximum Allowed
Mow Speed
The selected setting is displayed as an X on the
traction-speed bar graph along with the cruise control
and pedal stop settings. An X in a bar shows you
that the maximum speed is limited by the supervisor
g028522 (Figure 27 or Figure
Note:
This setting is retained in memory and applied
to the traction speed until you change it.
1. In the Settings Menu, scroll down to Mow Speed
and press the right button.
2. Use the right button to increase the maximum
mow speed in 5% increments between 50% and
100%.
3. Use the center button to decrease the maximum
mow speed in 5% increments between 50% and
100%.
4. Press the left button to exit.
Setting the Maximum Allowed
Transport Speed
The selected setting is displayed as an X on the
traction-speed bar graph along with the cruise control
and pedal stop settings. An X in a bar shows you
that the maximum speed is limited by the supervisor
(Figure 27 or Figure
Note:
This setting is retained in memory and applied
to the traction speed until you change it.
1. In the Settings Menu, scroll down to Transport
Speed and press the right button.
2. Use the right button to increase the maximum
transport speed in 5% increments between 50%
and 100%.
3. Use the center button to decrease the maximum
transport speed in 5% increments between 50%
and 100%.
4. Press the left button to exit.
30
.
FF
, set the
N
FF
position.
N
29).
29).
position