Power Button; Led Indicator - Blaupunkt BT04 Owner's Manual

Many thanks to buy our product. This model includes below main features.
1. Bluetooth function for audio streaming playback.
2. PLL FM radio with station memory.
3. MicroSD card playback (max supported device up to 32GB) .
4. Aux in.
5. Built-in rechargeable battery power.
Location of controls：

1.Power button

a.Press it 2 seconds to power on/off the unit.
b.Short press it to switch the play mode between Bluetooth/FM/microSD and AUX IN mode.
2.Play/pause button
a. Long press it 2 seconds to switch the play mode between Bluetooth/FM/microSD and AUX IN mode.
b. In Bluetooth and microSD card playback mode, short press it to play pause or resume music playback.
c. In FM radio mode, short press it to scan and save the available station automatically.
3,4.Volume +/- button
a. Press and hold it to adjust the output volume level.
b. In Bluetooth and microSD card playback mode, short press it to skip the playback track.
c. In FM radio mode, short press it to pick up the preset station.
5.Phone call picking up button.
6. MicroUSB DC 5V power jack
7.Charging LED indicator.
8.microSD card slot.
9.AUX IN jack.

10.LED Indicator.

Battery charging
This unit had built-in rechargeable lithium battery inside. Before start the playing, please follow up below
step for charging.
1.Using the supplied USB to microUSB type charging cable connects the speaker with your USB charger (USB
adaptor or USB output port
like on PC, USB rating output: 5V/1A, other USB charger with current equal or above 1A). The microUSB
connector should connect with the
DC 5V power jack on the rear panel of speaker, and the another terminal connect with USB charger. Then plug
your USB charger into the
household AC power.
2. The charging LED will light on in red color during charging, and the red color LED will off when the battery
is fully charged.
3. The speaker will off automatically when the battery power exhausted, please arrange recharge for playing.
Important: We recommend connect the USB charger with rating output spec at DC 5V/1A, or equal or above
1A output current USB power. The general USB output on PC (personal computer) is 5V/1A (please reference
your PC spec for checking). There may have some charging noise or abnormal function from speaker if the
charging current is too low. If it happened, please remove the charging power and put the speaker in a while,
then the speaker will reset the function in normal. Please kindly note this is not malfunction.
7