Pto Mount Arm Installation - Peco 54120901 Operator's Manual

PTO Mount Plate Assembly & Installation
To Install the Right PTO Mount Plate (Item #1), remove the loose hardware from the far right side of the Side Rear
Frame Bracket. Align the bolt holes of the Right PTO Mount Plate to those of the Side Rear Frame Bracket and
secure the Right PTO Mount Plate by replacing the (2) 3/8"-16 x 1-1/4" Carriage Bolts (Item #3) and (2) 3/8"-16 Ny-
Flange Lock Nuts (Item #4). Refer to the Figure below.
To Install the Left PTO Mount Plate (Item #2), align the bolt holes of the Left PTO Mount Plate to those located on the
Side Rear Frame Bracket. Refer to the Figure below. Secure the Left PTO Mount Plate by using (2) 3/8"-16 x 1-1/4"
Carriage Bolts (Item #3) and (2) 3/8"-16 Ny-Flange Lock Nuts (Item #4).
Note: Keep all hardware relatively loose for the installation of the PTO Stop Plate.
Figure A
Side Rear
Frame Bracket
9