Table of Contents
Advertisement
Weight Kit Installation
Position the Dual Weight Bracket Base (Item #1) under the caster tubing w/ opening towards caster fork. Next,
position the Weight Bracket Clamp (Item #2) on top of caster tubing w/ opening towards caster fork.
Align the (4) holes of the Weight Bracket Clamp (Item #2) to the holes in the Dual Weight Bracket Base (Item #1).
Loosely fasten the Weight Bracket Clamp (Item #2) to the Weight Bracket Base (Item #1) using (4) 5/16"-18 x 3" Bolts
(Item #4) & (4) 5/16"-18 Ny-Flange Lock Nuts (Item #5).
Position the Weight Bracket Base and the Weight Bracket Clamp assembly along the caster tubing to prevent
interference from caster forks or any other objects. Tighten the fasteners in an 'X' pattern until assembly is firmly
clamped to caster tubing. Do not over tighten which may result in bending Weight Bracket Clamps (Item #3).
Insert (1) Weight (Item #3) Into the Weight Bracket Base (Item #2) & align the holes of the Weight w/ the holes of the
Weight Bracket Base (Item #2). Fasten the Weight (Item #1) to the Weight Bracket Base Using (1) Clevis Pin (Item
#6) & (1) Hair Pin Clip (Item #7) per weight.
Repeat on additional caster. Refer to the Figure Below.
Figure A
5
2
1
Item # Part # Desc.
1
2
3
4
5
6
7
3
4
7
B1014 Dual Weight Bracket / Base
B1015 Weight Bracket / Clamp
Y0025 28 lb. Suitcase Weight
K1472 HHCS 5/16"-18 x 3" GR5
K2516 Ny-Flange Lock Nut 5/16"-18
K1473 Clevis Pin 1/2" x 3"
K1478 Hair Pin Cotter / Double Loop
6
Qty.
1
1
2
4
4
2
2
23
Advertisement
Table of Contents
