Exhaust Deflector Installation
To install the Exhaust Deflector (Item #1), Fasten a 1/4"-20 x 1/2" HWHTCS self-tapping screw (Item #2) between the
front bolt hole and the rear tab bolt hole of the Exhaust Deflector. Refer to Figure A. This will help keep the Deflector
stable.
Next, align the carriage bolt holes of the Exhaust Deflector to the carriage bolt holes located on the tab of the Rear
Frame Bracket. Secure the Exhaust Deflector using (2) 5/16"-18 x 1" Carriage Bolts (Item #3) and (2) 5/16"-18 Ny-
Flange Lock Nuts (Item #4). Refer to Figure B.
Figure A
Figure B
11