Table of Contents
Advertisement
PTO Stop Plate Assembly & Installation
Note: Keep all hardware relatively loose until the end.
To install the PTO Stop Plate (Item #1), align the bolt holes of the PTO Stop Plate to those of the PTO Mount Plates.
Secure the PTO Stop Plate to the PTO Mount Plates by using (4) 1/4"-20 x 3/4" HHCS (Item #2) and (4) 1/4"-20 Ny-
Flange lock Nuts (Item #3). Refer to the Figure Below.
Tighten all hardware at this time.
Figure A
10
Advertisement
Table of Contents
