Pto Drive Assembly Installation; Handle Extension Kit Installation - Peco 54120901 Operator's Manual

PTO Drive Assembly Installation

Locate the PTO mounting slots on both the Left and Right PTO Mount Plates. Insert the pivot rod of the PTO
Assembly (Item#1) into the mounting slots of the Left and Right PTO Mount Plates. Secure the PTO Assembly by
using (1) PTO Assembly Mount Pin (Item#2) and (1) Hair Pin Clip (Item#3). Refer to Figure A.
Figure A
A2266

Handle Extension Kit Installation

To install the Handle Extension Kit, align the (2) bolt holes of the Handle Extension (Item #2.1) to the Base Handle of
the PTO-R Assy (Item #1). Secure the Handle Extension using (2) 5/16"-18 x 1" Carriage Bolts (Item #2.2.1) and (2)
5/16"-18 Ny-Flage Lock Nuts (Item #2.2.2). Finally, install the Black Handle Grip (Item #2.2.3) onto the top of the
Handle Extension. Refer to Figure B.
Figure B
PTO-R Assy / Sm. Pulley Gd.
PTO Mount
Slots
3
15