Saving Configuration Via Web - Planet IGS-6325 Series Quick Installation Manual

5.2 Saving Configuration via Web
In the Industrial Managed Switch, the running configuration stores in the RAM. In
the current version, the running configuration sequence of running-config can be
saved from the RAM to FLASH by executing save startup config command, so that
the running configuration sequence becomes the startup configuration file, which is
called configuration save.
To save all applied changes and set the current configuration as a startup
configuration, the startup-configuration file will be loaded automatically across a
system reboot.
1. Click Maintenance > Switch Maintenance > Save Startup Config.
Figure 5-5: Maintenance
Figure 5-6: Save Startup Config
13