Installing The Palm-Rest And Keyboard Assembly - Dell Inspiron 7501 Service Manual

Installing the palm-rest and keyboard assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the installation procedure.
Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the system board.
2. Install the display assembly.
3. Install the touchpad.
4. Install the DC-in port.
5. Install the power button with fingerprint
6. Install the I/O board.
7. Install the coin-cell battery.
8. Install the heat sink (discrete)
9. Install the system fan.
10. Install the GPU fan.
11. Install the speakers.
12. Install the SSD-1 (M.2 2280)
13. Install the SSD-2
14. Install the memory module.
15. Install the WLAN.
16. Install the battery (3 cell)
17. Install the base cover.
18. Follow the procedure in
reader.
or heat sink (UMA).
or SSD-1 (M.2 2230).
or battery (6 cell).
after working inside your computer.
Removing and installing components 61