Storage; Display - Dell Inspiron 7501 Service Manual

Storage

Table 6. Storage options
Option
SATA Operation
Storage Interface
SMART Reporting
Drive Information

Display

Table 7. Display options
Option
Display Brightness
Touchscreen
EcoPower
Full Screen Logo
Description
Allows you to configure the operating mode of the integrated SATA
hard drive controller.
The options are:
• Disabled
• AHCI
• RAID On—By default, the RAID On option is enabled.
NOTE: SATA is configured to support RAID mode.
Allows you to enable or disable various drives on board.
The options are:
• SATA-0
• M.2 PCIe SSD-0
• M.2 PCIe SSD-1
By default, all the options are enabled.
This field controls whether hard drive errors for integrated drives are
reported during system startup. This technology is part of the Self
Monitoring Analysis and Reporting Technology (SMART) specification.
By default, the Enable SMART Reporting option is disabled .
Provides information about drive type and device.
Description
Allows you to set the screen brightness when running on battery and
AC power.
The options are:
• Brightness on battery power - By default, set to 50.
• Brightness on AC power - By default, set to 100.
Allows you enable or disable the touchscreen for the operating system.
Touchscreen - By default, all the option is enabled.
NOTE: Touchscreen always works in BIOS setup irrespective
of its setting.
Allows you to turn on the EcoPower feature in the panel.
Enable EcoPower - By default, this option is enabled.
EcoPower increases the battery life by reducing the display brightness
when appropriate.
Displays full screen logo when the image matches screen resolution.
By default, all the option is disabled.
System setup 67