Installing The M.2 2230 Solid-State Drive (Ssd-1) - Dell Inspiron 7501 Service Manual

Steps
1. Remove the two screw (M2x3) that secures the solid-state drive module shield and solid-state drive module to the palm-rest and
keyboard assembly.
2. Lift and remove the solid-state drive module shield from the solid-state drive slot.
3. Slide and remove the solid-state drive module from the solid-state drive slot.

Installing the M.2 2230 solid-state drive (SSD-1)

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
NOTE: Slot 1 supports both M.2 2230 and M.2 2280 SSD.
About this task
The figure indicates the location of the solid-state drive bracket and provides a visual representation of the bracket alignment procedure
to accommodate the M.2 2280 solid-state drive from slot 1.
26 Removing and installing components