Troubleshooting For Wireless Connection Adapter - Daikin FTXTA30A2V1BW User Reference Manual

8 | Troubleshooting

8.3 Troubleshooting for wireless connection adapter

User reference guide
52
The following table provides a brief description of how to deal with some
problems. If none of the following solutions fix the problem, go to
www.onlinecontroller.daikineurope.com/
Problem
Connection to the WLAN adapter is not
possible (none of the LEDs are blinking).
The WLAN adapter is NOT visible on the
unit overview screen (Home screen)
after configuration of the WLAN
adapter (WPS option).
The WLAN adapter is NOT visible in the
available Wi-Fi networks list on the
smart device (Access point option).
Displayed indoor/outdoor temperature/
humidity value in Online Controller
differs from the value measured by
other appliances.
for more information and FAQ.
Measure
▪ Try operating the unit with the user
interface.
▪ Check if the power is on.
▪ Turn the unit off and back on again.
▪ Make sure the wireless LAN adapter is
close enough to the communication
device.
▪ Check if communication is OK.
▪ Make sure that the smart device is
connected to the same wireless
network as the WLAN adapter.
▪ Try resetting to the factory default
and repeat the setting. See
the connection setting to the factory
4
default" [ 36].
▪ Try switching between access point
and WPS setting to change the
wireless channel.
channel MUST be between 1~11.
▪ Check if communication is OK.
▪ Try resetting to the factory default
and repeat the setting. See
the connection setting to the factory
4
default" [ 36].
▪ Online Controller displays indoor/
outdoor temperature/ humidity only
for the indoor/outdoor
surrounding.
▪ Measured temperature/humidity for
other appliances may differ due to
different condition around the unit
(e.g. direct sunlight,
accumulation...)
▪ Temperature/humidity displayed in
Online Controller is only referential.
http://
"To reset
The wireless
"To reset
unit's
frost
FTXTA30A2V1BW
Split system air conditioner
4P518786-4F – 2020.05