To connect the wireless adapter to your home network
To connect using the WPS button
To connect using SSID and KEY number
FTXTA30A2V1BW
Split system air conditioner
4P518786-4F – 2020.05
The wireless adapter can be connected to your home network using the:
▪
WPS button on the router (if present),
▪
SSID and KEY number located on the unit.
1 Hold
for at least 5 seconds in the default screen.
Result: The confirmation display (menu ) appears.
2 Press repeatedly
3 Press
to confirm the selection.
Result: is blinking. The timer LED is blinking.
4 Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
INFORMATION
If the connection with your router is not possible, try procedure
SSID and KEY
number" [
5 Press
to exit the menu.
Result: The display will return to the default screen.
1 Hold
for at least 5 seconds in the default screen.
Result: The confirmation display (menu ) appears.
2 Press repeatedly
3 Press
to confirm the selection.
Result: is blinking. The operation and timer LEDs are blinking alternately.
4 Connect your smart device to the access point in the same way as to a
standard wireless network.
5 Enter the SSID number and password located on the unit or in the accessory
set.
or
until the WPS setting display (menu ) appears.
4
35].
or
until the AP mode display (menu ) appears.
5
Operation
|
"To connect using
User reference guide
35