Page 1
Differential DC Voltage Data Logger PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 2 Installation Guide To view the full MadgeTech product line, visit our website at madgetech.com. 2 Wiring the Data Logger 2 Device Operation 4 Device Maintenance 4 Need Help?
Page 2
Wiring the Data Logger • Batch Start is used for managing multiple loggers at once Volt101A, 2.5 V, 15 V and 30 V models Single • Real Time Start stores the dataset as it records Ended Wiring while connected to the logger Two-position removable screw terminal connections;...
Page 3
1. Select Alarm Settings from the Device Menu in the Green LED blinks: 10 seconds to indicate MadgeTech Software. A window will appear allowing to logging and 15 seconds to indicate delay set the high and low alarms and warning alarms.
Page 4
Note: Be sure not to over tighten the screws or strip the threads. Product Support & Troubleshooting: • Visit our Resources online at madgetech.com/resources. • Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com. MadgeTech 4 Software Support: • Refer to the built-in help section of the MadgeTech 4 Software.