Grandstream Networks GWN76 Series User Manual page 70

Multicast to Unicast
Enable Voice Enterprise
Enable 11R
Enable 11K
Enable 11V
ARP Proxy
Default value is 1, meaning that AP will have DTIM broadcast every
beacon.
If set to 10, AP will have DTIM broadcast every 10 beacons.
Valid range: 1 – 10.
Once selected, AP will convert multicast streams into unicast streams over
the wireless link. Which helps to enhance the quality and reliability of
video/audio stream and preserve the bandwidth available to the non-
video/audio clients.
Check to enable/disable Voice Enterprise. The roaming time will be
reduced once enable voice enterprise.
•
The 802.11k standard helps clients to speed up the search for
nearby APs that are available as roaming targets by creating an
optimized list of channels. When the signal strength of the current
AP weakens, your device will scan for target APs from this list.
•
When your client device roams from one AP to another on the
same network, 802.11r uses a feature called Fast Basic Service
Set Transition (FT) to authenticate more quickly. FT works with
both pre-shared key (PSK) and 802.1X authentication methods.
•
802.11v allows client devices to exchange information about the
network topology,
environment, making each client network aware, facilitating
overall improvement of the wireless network.
Note: 11R is required for enterprise audio feature, 11V and 11K are
optional. This field is available only when "Security Mode" is set to
"WPA/WPA2" or "WPA2".
Check to enable 802.11r. This field is available only when "Security Mode"
is set to "WPA/WPA2" or "WPA2".
Check to enable 802.11k
Check to enable 802.11v
This option will enable GWN AP to answer the ARP requests from its LAN
for its connected Wi-Fi clients. This is mainly to reduce the airtime
consumed by ARP Packets
GWN76XX User Manual
Version 1.0.15.20
including information about the RF
P a g e | 70