Stay alert, watch what you are doing and use common Intended use sense when operating a power tool. Do not use a Your BLACK+DECKER BEW220 sander has been designed power tool while you are tired or under the influence for sanding and polishing wood, metal, plastics and painted of drugs, alcohol or medication.
Page 4
ENGLISH (Original instructions) d. Remove any adjusting key or wrench before turning Slippery handles and grasping surfaces do not allow the power tool on. A wrench or a key left attached to a for safe handling and control of the tool in unexpected rotating part of the power tool may result in personal injury.
Page 5
If the supply cord is damaged, it must be replaced by the Residual risks. manufacturer or an authorised BLACK+DECKER Service Additional residual risks may arise when using the tool which Centre in order to avoid a hazard.
“technical data” are in compliance with: Maintenance 2006/42/EC, EN62841-1:2015, EN62841-2-4:2014. Your BLACK+DECKER tool has been designed to operate These products also comply with Directive 2014/30/EU and over a long period of time with a minimum of maintenance. 2011/65/EU. For more information, please contact Black &...
Page 7
Australia & New Zealand S S t t anley Black & Decker www.blackanddecker.com.au www.blackanddecker.co.nz Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ)