Advertisement
PREPARATION FOR USE
1. Some sites or locations may require
that checks are made with regulatory
authorities (councils) prior to the set
up and use of this lighting tower.
2. Ensure the machine's set-up location
is clear of any dangers such as road-
ways with moving traffic, moving
machinery etc.
3. Ensure that the lighting tower is
securely parked prior to use. Barriers,
fences and warning signs may need
to be erected to ensure awareness of
the unit in operation.
4. Carefully inspect the lighting tower for
evidence of damage resulting from
shipment.
5. Ensure that all warning decals and
signage
have
understood prior to operating lighting
tower.
6. Preparation for use of the machine
requires a complete function check
together with a visual inspection to
ensure a properly working unit.
Check the following mechanical sub-
assemblies function correctly;
a) Confirm all four outrigger inner-arms
slide in and out freely and that the
spring-operated plunger pins engage
and
lock
the
extended and fully retracted. Confirm
all outrigger jacking legs can be
wound up and down freely and that
the jack feet are not bent or distorted.
b) Confirm the telescopic mast moves
smoothly when raised and lowered
and wire ropes are free of fraying and
signs of adverse wear.
7. Prior to use, check the following
machine fluid levels.
a) engine radiator coolant
b) engine oil level.
c) fuel tank level.
d) hydraulic tank level.
Section 1
METRO-MH
SAFETY PRECAUTIONS
been
read
and
arms
when
fully
Page 1-5
DELIVERY AND PERIODIC INSPECTION
REGULAR PERIODIC INSPECTIONS ARE
NECESSARY FOR MACHINE SERVICING
AND MAINTENANCE.
1. This machine requires periodic safety
and
maintenance
competent personnel.
2. Particular attention is required during
checks to ensure that the machine
functions as it was designed to.
3. There should be no abnormal noises or
vibrations evident during the machine's
operation. In the event that an operator
becomes aware
operation while using the machine,
then
it
should
immediately, stowed safely and the
problem reported to an authorised
person.
4. All machines require both preventive
and corrective maintenance throughout
their useful service life to maintain the
machine
in
a
condition.
5. Reference should be made to Section 2
of
this
manual
Maintenance) for procedures relating to
regular and periodic inspections.
inspections
by
of
any abnormal
be
shut
down
safe
and
reliable
(Service
and
1001206598
Advertisement
