Astoria ARGENTA User Manual page 25

6.13.2 SAE version
To use the cup warmer, proceed as follows:
Place the cups on
the coffee machine
cup warmer (1);
move the cup warm-
er switch (26) to the
ON position.
To adjust the cup
warmer's temperature,
proceed as follows:
Upon the machine
switch-on, keep but-
ton on the right-
PROG.
STOP
hand push-button
panel pressed: the flashing led will indicate the cur-
rent configuration of the cup warmer according to
indications in the following drawings;
keep button pressed until on the keyboard the
PROG.
STOP
led switches from flashing to a still light;
Press the key that corresponds to the desired con-
figuration;
confirm the operation by pressing button
OFF 80°C
70°C
OFF 80°C
70°C
For safety reasons it is advisable not to place cloths or other objects
on the cup heater surface to keep the machine from overheating.
62 260
of
1
26
PROG.
STOP
PROG.
STOP
90°C
PROG.
STOP
100°C
90°C 110°C
6.13.3 DISPLAY version
To use the cup warmer, proceed as follows:
Place the cups on the coffee machine cup warmer (1);
move the cup warmer switch (26) to the ON position.
To adjust the cup warmer's temperature, proceed as
follows:
Press button
seconds until all leds of the dose
buttons are lit;
press button
until the following message will
be displayed:
CUP WARMER
by means of buttons (+) and (-) of the right-hand
push-button panel, adjust the autosteamer's tem-
perature displayed;
.
Increases
confirm the operation by pressing button
To exit the programming mode,
press the key
To switch off the cup warmer, set a temperature of less than 70°C (on
display will appear ---- ) or position the cup warmer switch to OFF.
for at least 5
PROG.
STOP
repeatedly
PROG.
STOP
80 °C
Increases Decreases
( + ) ( - )
Decreases
( + ) ( - )
PROG.
STOP
PROG.
STOP
PROG.
STOP
PROG.
STOP
;
PROG.
STOP
PROG.
STOP
USER manual