Installing A Book Card; Selecting A Book - Franklin BOOKMAN ENC-2046 User Manual

Installing a Book Card

Warning: Never install or remove a
book card while your BOOKMAN is
turned on. If you do, information that
you've entered in the built-in book, as
well as in any other installed book cards,
will be erased.
1. Turn your BOOKMAN off.
2. Turn your BOOKMAN over.
3. Align the tabs of the book
card with the notches in the
slot.
4. Press the book card down
until it snaps into place.
Removing Book Cards
Warning: When you remove a
book card to install another, informa-
tion that you entered in the removed
book card will be erased.

Selecting a Book

Once you have installed a book card in
your BOOKMAN, you can select
which book you want to use.
1. Turn your BOOKMAN on.
2. Press
CARD
These are sample books.
3. Press or
book you want to use.
4. Press
ENTER
Resuming Where You Left Off
You can turn off your BOOKMAN at
any time. When you turn your BOOK-
MAN on again, the screen that you
last viewed reappears.
Copyright Information
To see copyright information about
this encyclopedia, highlight Copyright
on the Setup menu and press
4
.
to highlight the
to select it.
.
ENTER