Installing A Book Card; Selecting A Book - Franklin BOOKMAN CDR-440 User Manual

Installing a Book Card

Warning: Never install or remove a
book card when your BOOKMAN is
turned on. If you do, information that
you've entered in its built-in book, as
well as in any other installed book
cards, will be erased.
1. Turn your BOOKMAN off.
2. Turn your BOOKMAN over.
3. Align the tabs of the book
card with the notches in the
slot.
4. Press the book card down
until it snaps into place.
Removing a Book Card
Warning: When you remove a
book card to install another, infor-
mation that you entered in the
removed book card will be erased.

Selecting a Book

If you've installed a book card in your
BOOKMAN, you can select which
book you want to use. Follow these
steps.
1. Turn your BOOKMAN on.
2. Press
CARD
3. Press or
book symbol.
4. Press
ENTER
Resuming Where You Left Off
You can turn off your BOOKMAN
at any time. When you turn on
your BOOKMAN again, the
screen that you last viewed ap-
pears.
4
.
to highlight a
to select it.