Installing A Book Card; Selecting A Book - Franklin BOOKMAN EMQ-2061 User Manual

Installing a Book Card

Warning: Never install or remove a
book card while your BOOKMAN is
turned on. If you do, information that
you have entered in the built-in book,
as well as in any other installed book
cards, may be erased.
1. Turn your BOOKMAN off.
2. Turn your BOOKMAN over.
3. Align the tabs of the book
card with the notches in the
slot.
4. Press the book card down
until it snaps into place.
Removing Book Cards
Warning: When you remove a
book card to install another, informa-
tion that you entered in the removed
book card may be erased.

Selecting a Book

Once you have installed a book card in
your BOOKMAN, you can select
which book you want to use.
1. Turn your BOOKMAN on.
2. Press
CARD
These are sample books.
3. Press or
book you want to use.
4. Press
ENTER
Follow the Arrows
The flashing arrows on the right of the
screen show which arrow keys you
can press to move around the screen.
Resuming Where You Left Off
You can turn off your BOOKMAN at
any time. When you turn your
BOOKMAN on again, the screen
that you last viewed reappears.
5
.
to highlight the
to select it.