ABB Welcome IP IPTouch 7" Series Product Manual page 42

Commissioning
Card register
1. Enter registering mode
On the "Card management" screen, click "Card register", select the device and then click "Card
register".
The pushbutton module on the outdoor station will flash orange as a prompt to swipe an IC
card.
2. Exit registration mode
Press the first button on the outdoor station to exit registration mode.
If an IC card has been registered, the outdoor station will exit registration mode automatically if
no operations are carried out within 15 s.
If no IC card has been registered, the outdoor station will exit registration mode automatically if
no operations are carried out within 300 s.
│42
Product manual 2TMD041800D0002